AMETEK Verifire 红外干涉仪

AMETEK Verifire 红外干涉仪,文章来源于AMETEK阿美特克,红外干涉仪是根据恒星干涉仪和射电干涉仪的原理而设计成应用于红外波段的仪器。适用于高精度红外成像应用的测量方法,Verifire 干涉仪,红外波长光学成像的应用广泛,种类繁多。在系统的设计波长下进行测试对开发、最终对准和鉴定至关重要。用于航空航天和国防的夜视、红外和热成像系统、光刻子系统、遥感望远镜和外来材料鉴定对波长有不同的要求,而它们都受益于在红外干涉仪系统在设计波长下的测试。由于干涉仪的分辨率取决于波长和望远镜(或射电天线)间的距离之比,而红外波长比射电波长小几个量级,所以在达到同样分辨率的要求下,红外干涉仪的基线距离比射电干涉仪缩短几个量级。在测量恒星的角径和分辨分立源时,基线距离为1公里的红外干涉仪(工作在10微米),能达到基线相距为1万公里的甚长基线干涉仪(工作在10厘米)的效果。红外干涉仪除可提高分辨率外,还可用来获得极高分辨率的谱线轮廓。AMETEK Verifire Infrared Interferometers, Article from AMETEK AMETEK, Infrared interferometers are instruments designed to be applied in the infrared wavelength band based on the principles of stellar interferometers and radio interferometers. Measurements suitable for high-precision infrared imaging applications, Verifire interferometers, Infrared wavelength optical imaging is used in a wide variety of applications. Testing at the wavelength for which the system was designed is critical for development, final alignment and qualification. Night vision, infrared and thermal imaging systems, lithography subsystems, remote sensing telescopes, and exotic materials characterization for aerospace and defense have different wavelength requirements, and they all benefit from testing infrared interferometer systems at their design wavelengths. Since the resolution of an interferometer depends on the ratio of the wavelength to the distance between the telescope (or radio antenna), and since infrared wavelengths are several orders of magnitude smaller than radio wavelengths, the baseline distance of an infrared interferometer is several orders of magnitude shorter than a radio interferometer for the same resolution requirement. In the measurement of stellar angular diameter and resolution of discrete sources, the baseline distance of 1 kilometer of infrared interferometer (working at 10 microns), can reach the baseline distance of 10,000 kilometers of very long baseline interferometer (working at 10 centimeters) effect. In addition to improving resolution, infrared interferometers can be used to obtain very high-resolution spectral line profiles.

Verifire红外干涉仪

AMETEK Verifire 红外干涉仪产品描述

系统:
◆测量功能:精密测量各种反射面和光学系统的表面面形、精密测量光学系统的传输波前
◆测量技术:机械相移干涉测量(PSI)
◆校准系统 :快速条纹采样系统(QFAS) (双光点定位于十字线)
◆测量光束直径 :4″(102mm)或6″(152mm)
◆对准视场范围FOV :4″:±3°;6″:±2°;
◆光学中心线 :4.25″(108mm)
◆激光光源:大功率稳频氦-氖激光,IIIa 级
◆波长: 633 nm
◆频率稳定度: < 0.0001 nm
◆相干长度 :>100m
◆成像分辨率 :1000 x 1000 像素
◆帧速 :43Hz
◆数据采集时间 :302ms
◆数据模式: 8位
◆放大 :电控数显放大1-5X
◆偏振 :接近圆偏振(1.2:1或者更好)
◆光曈调焦范围: 4″:±2.5m;6″:±5.5m;
◆计算机和App :高性能DELL PC,Windows7,64位,ZYGO原装AppMetroproTM X和MetroproTM 9
◆安装构造 :水平卧式或垂直立式
◆附件 :详细参考ZYGO 激光干涉仪附件向导文件,OMP-0463
◆尺寸(长x宽x高): 4″:69 x 31 x 34 cm (27.3 x 12.1 x 13.4 in.);6″:92 x 31 x 34cm (36.4 x 12.1 x 13.4 in.)
性能参数:
◆RMS重复性: < 0.06 nm, λ/10,000 (2σ)
◆RMS波前重复性:< 0.35 nm,λ/1800 (mean + 2σ)
◆像素峰值偏差:< 0.5 nm, λ/1200 (99.5th %)
工作环境:
◆温度:15°C - 30°C (59°F - 86°F)
◆温度变化率: <1.0°C/15min
◆湿度:相对湿度5% - 95% , 无凝结
◆隔振:机械移相测量模式推荐使用被动隔振系统。

Product Description

System.
◆Measurement function: Precision measurement of various reflective surfaces and surface profiles of optical systems, precision measurement of transmitted wavefront of optical systems
◆Measurement technology: Mechanical phase-shift interferometry (PSI)
◆Calibration system :Quick Fringe Sampling System (QFAS) (double spot centered on the crosshairs)
◆ Measurement Beam Diameter : 4″ (102mm) or 6″ (152mm)
◆ Alignment field of view FOV : 4″: ±3°; 6″: ±2°;
◆Optical centerline :4.25″(108mm)
◆Laser light source: high power frequency stabilized helium-neon laser, Class IIIa
◆Wavelength: 633 nm
◆Frequency stability: < 0.0001 nm
◆ Coherence length :>100m
◆Imaging resolution: 1000 x 1000 pixels
◆Frame rate :43Hz
◆Data acquisition time :302ms
◆Data mode: 8-bit
◆Amplification : Electrically controlled digital amplification 1-5X
◆Polarization : Near circular polarization (1.2:1 or better)
◆Optical telson focusing range: 4″: ±2.5m; 6″: ±5.5m;
◆Computer and software : High-performance DELL PC, Windows 7, 64-bit, ZYGO original software MetroproTM X and MetroproTM 9
◆Installation structure : Horizontal horizontal or vertical vertical
◆Accessories: Refer to the ZYGO Laser Interferometer Accessory Wizard, OMP-0463, for details.
◆ Dimensions (L x W x H): 4″: 69 x 31 x 34 cm (27.3 x 12.1 x 13.4 in.); 6″: 92 x 31 x 34 cm (36.4 x 12.1 x 13.4 in.)
Performance Parameters:
◆RMS repeatability: < 0.06 nm, λ/10,000 (2σ)
◆RMS wavefront repeatability: < 0.35 nm, λ/1800 (mean + 2σ)
◆Pixel peak deviation: < 0.5 nm, λ/1200 (99.5th %)
Working environment:
◆ Temperature:15°C - 30°C (59°F - 86°F)
◆Temperature change rate: <1.0°C/15min
◆Humidity: 5% - 95% relative humidity, no condensation
◆ Vibration Isolation: Passive vibration isolation is recommended for mechanical phase shift measurement mode.
深圳银飞有售 AMETEK阿美特克Verifire 红外干涉仪
上一篇:你知道DPI705E压力指示仪用什么电池供电吗?
下一篇:Zygo Verifire MST多表面同时测试激光干涉仪

专业选型请咨询大家工作人员

全国统一服务热线

0755-23964199
0755-23964499
0755-23964599
0755-86531914

(国内任一地区手机、座机均可拨打)

  • 公众号

  • 微博

  • 电子邮件

版权所有:im电竞和泛亚电竞 粤ICP备15021421号

im电竞和泛亚电竞供应商哪家好,im电竞和泛亚电竞品牌推荐,im电竞和泛亚电竞先容说明,Fluke功率分析仪器价格,数字压力表多少钱

收缩

银飞电子在线客服

  • 3183402039 点击这里给我发消息
  • 3176116521 点击这里给我发消息
  • 2753209529 点击这里给我发消息
  • 微信扫一扫 给我发消息
  • 0755-23964199
  • 0755-86531914
  • 在线留言
XML 地图 | Sitemap 地图