SH60B S70Seahawk飞机皮托管测试适配器
皮托管测试适配器是用于连接大气数据测试仪与飞机皮托管和静压口的设备,它确保在测试过程中连接无泄漏,从而验证皮托管、软管及大气数据系统的完整性。适配器有多种类型和配置,适用于不同型号的飞机。安装和拆卸适配器通常简单易行,无需特殊工具,且适配器设计有自我测试功能,确保测试的准确性和安全性。
Adapter, Pitot Test
Part No. P62261M-4 (2 Req’d) NSN: 4920-01-317-1185
These units ?t the pitot probes located on the nose and when installed they will isolate and test each system separately or simultaneously.
Adapter , Pre-Test
Part No. PT16226 (2 Req’d) NSN: 4920-01-255-3336
When this unit is inserted into the adaptor and the extension hose is connected from the pneumatic generator the complete system, tester, hoses and adaptors can be tested before ?tting to the helicopter.
Adapter, Static Test
Part No. 33410SH-70-6 (2 Req’d) NSN: 4920-01-316-7823
These units ?t the static vents located on the side of the helicopter. The protective caps also act as pre-test adaptors.
Adapter, Static Blanking
Part No. 33410B-70 (2 Req’d) NSN: 4920-01-312-6152
This is used to blank off static vent on the opposite side of the helicopter, thus completely closing off the system.
Hose Assembly, Pitot Test
Part No. 60B-7270 (1 Req’d) NSN: 4720-01-312-6148
This hose is connected to each pitot inlet of the adaptor and is ?tted with two double acting quick disconnects for use when it is desirable to test only one pitot system.
Hose Assembly, Static Test
Part No. 60B-5160 (1 Req’d) NSN: 4720-01-312-6147
Part No. GK261 (2 Req’d) NSN: 5330-20-004-2486
Two sets of spare glands are stowed in the case. Seal & Spacer Kit - Part No. SSK261M This is optional equipment not included with kit and consists of a complete set of replacement seals and spacers for the P62261M-4 adaptor.
Seal - Part
Part No. 410SH-7 (4 Req’d) NSN: 5330-01-257-9051
Four Seals, for the 33410SH-70-6 & 33410B-70 adaptors are also supplied.
Lubricating Fluid
Part No. LF5050 (1 Req’d) NSN: 9150-21-920-6522
This ?uid is used to lubricate the glands of the pitot adaptor. It is recommended that a small amount be placed on the glands before installing adaptor on pitot head. This will ensure smooth installation onto the pitot probe.
Part No. 444-SH60B
One equipment manual is supplied with each kit.
Case Assembly
Part No. 105XYD-SH60B NSN: 4920-20-004-2491
Designed speci?cally for the SH60B-612, all of the foregoing equipment, manual and spare parts are stored and/or ransported in this out?tted Case
Assembly. The case is colour schemed to conform with typical GSE Yellow as per FED-STD-595/13538.
Aircraft Type | Pitot Test Adaptor | Pitot Probe Part No. | Static Test Adaptor Blanking Adaptor | Miscellaneous Adaptor | Pitot Pre-Test & Assembly Integrity Fixture | Air Data Accessories Kit |
---|---|---|---|---|---|---|
SH60B S70 Seahawk | P62261M-4 | 851AH |
33410SH-70-6 33410B-70* |
PT16226 | SH60B-612 |
Aircraft | SH60B / S70 Seahawk |
---|---|
Air Data Accessories Kit | SH60B-612 |
Category | Other Helicopter |
Lubricating Fluid | LF5050 |
Pitot Pre-Test & Assembly Integrity Fixture | PT16226 |
Pitot Test Adaptor | P62261M-4 |
Seal and Spacer Kit | GK261 |
Seal Kit | GK261 |
Static Test Adaptor / Blanking Adaptor |
33410SH-70-6 33410B-70* |
飞机 | SH60B / S70 Seahawk |
---|---|
Air Data 附件套件 | SH60B-612 |
类别 | 其他直升机 |
润滑液 | LF5050系列 |
Pitot预测试和装配完整性夹具 | PT16226 |
皮托管测试适配器 | P62261M-4 |
密封件和垫片套件 | GK261型 |
密封套件 | GK261型 |
静态测试适配器 / 消隐适配器 |
33410SH-70-6 33410B-70* |
AIR DATA ACCESSORIES KIT MODEL No. SH60B-612 (3281AS100-1) NSN: 4920-01-389-4270 SH60B SEAHAWK HELICOPTER
- Proprietary Information -
This kit contains all the equipment to test from source the complete pitot and static air data system on the SH60B Helicopter, as well as the means of pre-testing all adaptors and hoses prior to being ?tted to the helicopter.
- Proprietary Information -
This kit contains all the equipment to test from source the complete pitot and static air data system on the SH60B Helicopter, as well as the means of pre-testing all adaptors and hoses prior to being ?tted to the helicopter.
Adapter, Pitot Test
Part No. P62261M-4 (2 Req’d) NSN: 4920-01-317-1185
These units ?t the pitot probes located on the nose and when installed they will isolate and test each system separately or simultaneously.
Adapter , Pre-Test
Part No. PT16226 (2 Req’d) NSN: 4920-01-255-3336
When this unit is inserted into the adaptor and the extension hose is connected from the pneumatic generator the complete system, tester, hoses and adaptors can be tested before ?tting to the helicopter.
Adapter, Static Test
Part No. 33410SH-70-6 (2 Req’d) NSN: 4920-01-316-7823
These units ?t the static vents located on the side of the helicopter. The protective caps also act as pre-test adaptors.
Adapter, Static Blanking
Part No. 33410B-70 (2 Req’d) NSN: 4920-01-312-6152
This is used to blank off static vent on the opposite side of the helicopter, thus completely closing off the system.
Hose Assembly, Pitot Test
Part No. 60B-7270 (1 Req’d) NSN: 4720-01-312-6148
This hose is connected to each pitot inlet of the adaptor and is ?tted with two double acting quick disconnects for use when it is desirable to test only one pitot system.
Hose Assembly, Static Test
Part No. 60B-5160 (1 Req’d) NSN: 4720-01-312-6147
This assembly attaches to the static adaptors. The double acting quick disconnects operate in the same manner as that on the pitot test hose assembly. The extension ?tting then connects the static outlet hose of the pneumatic generator. A test unit for the blanking adaptor is a part of this assembly.
Part No. GK261 (2 Req’d) NSN: 5330-20-004-2486
Seal - Part
Part No. 410SH-7 (4 Req’d) NSN: 5330-01-257-9051
Four Seals, for the 33410SH-70-6 & 33410B-70 adaptors are also supplied.
Lubricating Fluid
Part No. LF5050 (1 Req’d) NSN: 9150-21-920-6522
This ?uid is used to lubricate the glands of the pitot adaptor. It is recommended that a small amount be placed on the glands before installing adaptor on pitot head. This will ensure smooth installation onto the pitot probe.
Part No. 444-SH60B
One equipment manual is supplied with each kit.
Case Assembly
Part No. 105XYD-SH60B NSN: 4920-20-004-2491
Designed speci?cally for the SH60B-612, all of the foregoing equipment, manual and spare parts are stored and/or ransported in this out?tted Case
Assembly. The case is colour schemed to conform with typical GSE Yellow as per FED-STD-595/13538.
如果您需要用于连接大气数据测试仪与飞机皮托管和静压口的设备,需要选型号或是需要技术交流,请联系大家专业工作人员吧!