Description

BriskHeat ACR3 Hot Bonder is the solution for quick and easy on site composite repairs.

General

Single or dual zone

8.4" (213mm) touch-screen with easy-to-use interface

USB port for data transfer (USB flash disk included)

Input ground fault interrupter breaker protected

Audible and visual alarms for high and low temperature / vacuum limits

Data logs digitally or through built-in printer : prints and records real-time status of cure including program parameters

 

 

Power

Universal Input Voltage: 100-130VAC, 200-240VAC

MAINS supply voltage fluctuations up to ±10% of the nominal voltage

Transient over voltages typically found on a Category II power source: i.e. a lighting circuit

Frequency: 50-60Hz

30 amps maximum per zone

Output cord receptacle: NEMA L15-30R 

Vacuum

Dual vacuum system: Built-in electric vacuum pump and vacuum venturi for each zone

Pressure: 28” Hg (13.8PSI)

Ability to manually adjust pressure for each zone

Temperature Control

Cure up to 1400oF (760oC)

10 thermocouple sensor inputs per zone

Accepts J-type thermocouple connectors

Accuracy: ±3°F (1.67°C)

Monitors all thermocouples for alarms

Environment

Intended for use in dry environments. Do not expose to wet spray.

Altitude up to 6562ft (2000m)

Storage temperature range: -4oF to 140oF (-20oC to 60oC)

Operating temperature range: 41oF to 104oF (5 oC to 40oC)

Maximum relative humidity: 80% for temperatures up to 88oF (31oC) decreasing linearly to 50% relative to humidity at 104oF (40oC)

Pollution degree 2 (normally only non-conductive pollution occurs, however a temporary conductivity caused by condensation must be expected)

 

The ACR®3 Hot Bonder composite curing KIT

Perform Cures Faster and Better

Single or dual zone

8.4" (213mm) full-color touch-screen

Dual vacuum system: Built-in electric vacuum pump and vacuum venturi for each zone

Universal voltage: 100-130VAC, 200-240VAC

30 amps output per heat zone

10 thermocouple sensors per zone

Accepts J-type thermocouples

Includes everything you need – Training DVD

 

 Easy-To-Use Software on a Full-Color HD Touchscreen

Multi-task: Perform several operations at once

Retains history of last 12 cures

Customized post cure analysis: Data logging intervals 1 to 99 minutes

Multiple language support: English, German, Russian, Chinese (Mandarin)

Transfer and archive post cure data history to your PC

Instantaneously analyze your data on your spreadsheet and word processor programs including 微软® Excel® and Word®

Transfer your programs quickly from one bonder to another

Update your hot bonder easily with the latest software version for FREE.

 Fast and Simple Data Transfer with USB Drive (USB Flash Disk Included)

Transfer and archive post cure data history to your PC

Instantaneously analyze your data on your spreadsheet and word processor programs including 微软® Excel® and Word®

Transfer your programs quickly from one bonder to another

Update your hot bonder easily with the latest software version for FREE.

* Please indicate voltage when ordering with NSN.

 

ACR 3 Hot Bonder Kit with Heaters includes:

ACR®3 hot bonder unit

One 10" x 10" (254 x 254mm) SR composite heat curing blanket per zone

One 12" x 12" (305 x 305mm) SR composite heat curing blanket per zone

One 16" x 16" (406 x 406mm) SR composite heat curing blanket per zone

10ft (3m) vacuum hoses (2 per zone)

10ft (3m) input power cord (1 per zone)

5ft (1.5m) heater output power cord (1 per zone)

USB flash disk

J-type thermocouples (10 per zone)

Standard connector adapters for thermocouple receptacles (10 per zone)

Vacuum bag feed-throughs (2 per zone)

Extra printer ribbon and paper (1 per zone)

DVD Training Video

BriskHeat ACR3 Hot Bonder Kit

Click 银飞 to go to the Chinese Website.